Teradek Bolt 4K LT 750 wireless set

Teradek Bolt 4K LT 750 wireless set

350,00  / day
(430,50  inc tax)
350.00 zł
+
  • Kontakt:
  • info@2k4k.pl
  • + 48 616 660 616
Categories: Signal transmission Accessories

Product features:

  • Video inputs: 1 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI or 3G-SDI), 1 x HDMI type A accepts HDMI 2.0 or HDMI 1.4)
  • Video outputs: 1 x Loopout 12G-SDI SMPTE 2082-1 standard / 75 Ω
  • Sdi support data support: Supports transfer of metadata, timecode and start/stop flags from most camera manufacturers.
  • Color sampling: SDI: YCbCr 4:2:2, 10-bit/ | HDMI: RGB 4:4:4, 8-bit
  • Input cross conversion: yes, HDMI to SDI
  • Send to receive delay: <0.001 sec
  • Supported resolutions: 4Kp23.98/24/25/29.97/30/50/59.94/60, 1080p23.98/24/25/29.97/30/50/59.94/60, 1080psf23.98 /24/25/29.97/30, 1080i50/59.94/60, 720p50/59.94/60, 480p50, 576p59.94/60, 480i(NTSC)/576i(PAL)
  • Video compression: visually lossless
  • Video format conversion support: connect HD source to Tx and get 4K signal from Rx. Connect 4K source to Tx, get HD resolution from Rx. You can also mix and match from one source: 4K signal to Tx can be 4K output from 1x Rx and HD output from 2nd Rx. I/O configuration can be controlled directly on the units or via the Bolt 4K app
  • Color Correction: None
  • Audio format: 48 kHz, 24-bit PCM
  • Audio Input: Built-in SDI/HDMI audio input (2 channels)
  • Dimensions: 132 x 91 x 27 mm
  • Weight: 358 g (12.6 oz)
  • Construction: milled aluminum (housing) and circuit board compliant with regulations
  • Mounting options: integrated male and female V-Mount (with through power), multiple mounting options with M3 and 3/8" holes
  • Configuration interfaces: OSD with menu, joystick navigation
  • Switches: on/off switch
  • USB interface functionality: Update via Micro-USB
  • Antennas: 4 external 2dBi RP-SMA antennas (included)
  • Non-DFS Frequencies:: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz
  • DFS Frequencies:: 5.270 ~ 5.670 GHz
  • Channel bandwidth: 13 channels with a width of 40 MHz
  • RF channel selection: automatic, manual, manual available for non-DFS channels
  • Encryption: AES-256, RSA-1024 key exchange
  • Rf power: 19 dBm EIRP (4 external 2 dBi antennas) (transmit power <80 mW)
  • Range: Up to 750 feet, line of sight
  • Unicast Multicast: You can connect one transmitter to up to 6 receivers
  • Can co-exist with Wi-Fi and 5 GHz cordless phones: Yes
  • Can support up to 6 sets in the same location: Yes
  • Power input: 2-pin circular locking connector 6-28 VDC
  • Battery: None, optional battery plate with gold or V mount
  • Nominal power consumption: 20 watts
  • Working temperature: 0-40℃
  • 1 x  12V lemo power supply
  • 7 x  cylindrical antenna
  • 1 x  D-Tap - LEMO cable
  • 1 x  magic arm SmallRig
  • 1 x  Teradek Bolt 4K reciver
  • 1 x  Teradek Bolt 4K transmitter
  • 3 x  V-LOCK 98Wh battery

Similarly

Others chose as well